Tikalflex Contact 12 is a shrink-free, very strong, weatherproof MS polymer adhesive for all kinds of bonding assignments in the maritime or mobile environment.

This MS polymer adhesive is suitable for permanently elastic, fixed, vibration-resistant bonds, can be used to compensate tolerances and can be sanded when cured.

Contact 12 can be used for applications above and below water. It hardens on exposure to humidity, can be coated with normal varnish after hardening and shows good resistance to nitric acid, caustic soda, oil and diesel.

Instead of using the more expensive Sikaflex 291i try the more economical Tikalflex Contact 12 instead..

Properties:

• Bonding of wood, aluminium, steel and GRP
• High strength
• Compensates for tolerances
• Shrink-free
• Weatherproof
• Sandable
• Use for applications above and below water

Features:

• Easy to use - cartidge gun required (not supplied) 
• Size: 290ml
• Skinning Time: 15 mins (at 23c / 55% humidity)
• Cure Time: 2mm depth - 24 hours (at 23c / 55% humidity)
• Tensile Strength: 2.3N/mm2 - DIN53504
• Shore A Hardness: 2mm layer - 60
• Colours: Black, Grey  or White
• Manufacturer's Technical Info Sheet or website

Please note: The following Tikal Marine Systems products (Tikalflex Contact 12) require to be dispatched via courier due to liquid product restrictions both within the UK and internationally - therefore will not be liable for the Free Delivery Royal Mail policy unfortunately.

J-B Weld J-B MarineWeld™ is a specially formulated two part Cold-Weld™ adhesive system that provides strong, lasting repairs for bonding different or similar surfaces, such as metal, composites, fiberglass and others.

MarineWeld™ sets in 20 minutes at room temperature.

At full cure, its color is white. It may then be shaped, tapped, filed, sanded and drilled, retaining full strength above or below the waters’ surface. MarineWeld™ has a 1:1 mixing ratio and tensile strength of 2350 PSI.

Features:

• Set time of 20 minutes
• Colour: White
• Tensile strength of 2350 PSI
• Functional Cure Time: 15-24 hours

Instructions:

PREPARE: Clean repair area of dirt, grease, oil, paint, rust etc. For best results use a detergent or degreaser to first clean the surface, then roughen surface with file or coarse snadpaper to provide best repair.

MIX: After removing the replaceable cap, press down on plunger and squeeze equal amounts onto a disposable surface and mix thoroughly.

APPLY: Press with appropriate tool in an even coat, weld bead or extruded shape as needed.

DRY: Sets in 20 minutes. Cures in 15 - 24 hours. Allow 4 - 6 hours before handling, and 15 hours (minimum) before putting object back in use.

Dr Sails Repair Packs are designed as an easy and fast solution for small composite repairs and it is the best way to fix an emergency on any kind of boat or board.

Ideal for a variety of applications: shaping, bonding, drilling, filling, sealing, reinforcing, etc..

The Repair Pack includes:

• 1 x Dr Sails Pocket - 10ml
• 1 x Dr Sails Filler - Microspheres
• 1 x Dr Sails Cleaner
• Gloves
• Spreader

Properties:

• Crash resistant
• Flexible
• Structural
• Underwater

Curing Time:

• Mix: 2 minutes
• Gel: 6 minutes
• Tack: 15 minutes
• Full: 24 hours

Designed for repairs to piping and hoses this is an industrial strength epoxy resin repair kit.

Good or temporary repairs and on more minor issues can be a permanent solution.

The PSP Leak Stop Epoxy Repair Kit also be painted and sanded, perfect for engine and plumbing repairs.

Features:

• Fibreglass bandage
• Size Options - Bandage:
  • 50mm x 1.5m
  • 75mm x 2.7m
• Epoxy stick
• Latex protective gloves
• Colour: Silver

Dr Sails 10ml Pocket is a single use format ideal for fast and clean applications.

Features:

• Self-applying format of 10ml epoxy
• Ratio 1:1
• Ideal to be stocked in a sailing suit
• Easy use for underwater application
• Pack of 3 units

Dr. Sails is a fast-cure, two part, epoxy based adhesive which will give fast and immensley strong repairs to sails and many other materials in as little as 8 minutes.

Ideal for glueing sail cloth, fibre glass, carbon, kevlar, metal, wood and neoprene. It will cure in any extreme conditions, even under water, fuel or gasoline and gives a pliable and flexible structural bond. The self-applying syringe static mixer fully mixes the adhesive as it's applied and allows you to reach the most complicated bonding situaions with absolute precision for fast and precise application.

Dr. Sails is a must kept on every boat or toolbox.

Features:

• Working Time: 8 minutes
• Curing Time: 20 minutes at 22c
• Can be applied on wet and/or greasy surfaces
• Suitable for fibreglass, carbon fibre, sailcloth (mylar, dacron, kevlar, thecnora, twaron), wood, metal, leather, neoprene & plastics.
• Odourless
• Working Temperature: Tested Range: -9c to 22c
• Chemical Resistance: Resists most commercial reagents
• Shelf Life: 36 months

Pack contains:

• Self-applying syringe of 25ml
• Two static mixer mixing nozzles
• Storage clip to attach the nozzles to the syring body
• User instructions

Please note: Certain Dr.Sails products require to be dispatched via courier due to liquid product restrictions (Dangerous Goods) both within the UK and internationally - therefore will not be liable for the Free Delivery Royal Mail policy unfortunately.

Applications:

Dr. Sails is a fast-cure, two part, epoxy based adhesive which will give fast and immensley strong repairs to sails and many other materials in as little as 8 minutes.

Ideal for glueing sail cloth, fibre glass, carbon, kevlar, metal, wood and neoprene. It will cure in any extreme conditions, even under water, fuel or gasoline and gives a pliable and flexible structural bond. The self-applying syringe static mixer fully mixes the adhesive as it's applied and allows you to reach the most complicated bonding situaions with absolute precision for fast and precise application.

Dr. Sails is a must kept on every boat or toolbox.

Features:

• Working Time: 8 minutes
• Curing Time: 20 minutes at 22c
• Can be applied on wet and/or greasy surfaces
• Suitable for fibreglass, carbon fibre, sailcloth (mylar, dacron, kevlar, thecnora, twaron), wood, metal, leather, neoprene & plastics.
• Odourless
• Working Temperature: Tested Range: -9c to 22c
• Chemical Resistance: Resists most commercial reagents
• Shelf Life: 36 months

Pack contains:

• Self-applying tube of 265ml
• Three static mixer mixing nozzles
• Storage clip to attach the nozzles to the syring body
• User instructions

Please note: Certain Dr.Sails products require to be dispatched via courier due to liquid product restrictions (Dangerous Goods) both within the UK and internationally - therefore will not be liable for the Free Delivery Royal Mail policy unfortunately.

Applications:

Dr.Sails APMA is able to harden under water and characterised by it's flexibility, fast use and offers an inclusive self-applicable format ready to use under all circumstances. 

Brings materials together under extreme conditions with precision, uniformity and guaranteed safety.

Benefits:

• High Viscosity
• Multi-Material Bonding
• Colour: Off-white
• Flexible Fast Curing (10 mins)
• Underwater Curing
• Solvent-free
• Non-sagging
• Ageing Resistant

Features:

• Volume: 30ml
• Dimensions: 4.5 x 6 x 22cm
• Weight: 95g 
• Performance: 12cm x 1m 
• Colour: Off-White
• Mixing syringe included

Please note: Certain Dr.Sails products require to be dispatched via courier due to liquid product restrictions (Dangerous Goods) both within the UK and internationally - therefore will not be liable for the Free Delivery Royal Mail policy unfortunately.​