Allen's high strength and rope friendly stainless steel ultra-strap makes them amongst the strongest and most reliable ball bearing blocks in their class. The range is available with different types of accessories including lacing eyes, hooks, swivels and cleats.

The range also features a central rivet that provides great options as a tie on becket. You’ll find a 30mm block to suit most control line applications

Features:

• Breaking Load: 450kg
• Length: 77mm
• Max Line Diameter: 8mm
• Max Working Load: 140kg
• Shackle Pin: 5mm
• Weight: 40g

This kit has been developed by PROtect tapes and with some of the world's leading Laser sailors - so serious kit!! The kit contains a large selection of ultra high molecular weight polyethylene tapes with an agressive acrylic adhesive - resulting in a very tough material and extremely low coefficent of friction - basically this box of tapes are the best in the market...!

It contains:

• 2 disks - 65mm for the mast step
• 2 stripes - 50mm wide for the mast step and mast deck
• 1 stripe - 17mm x 2m for snug fit of the top mast section
• 1 stripe - 30mm x 2m for snug fit of the top mast section
• 1 stripe - 34mm x 150mm for the deck abrasion from the tiller
• 1 stripe - 150mm x 300mm for the outhaul
• 5 squares - 30mm x 30mm for centre board

What else do you need?

A new Laser specific vang block featuring a 30mm Extreme High Load Block (XHL) with the Allen Kicking Strap Key - Curved. The block features the same extreme high load dynamic bearing technology as the rest of the Allen XHL range, but has been specifically adapted to work as the Laser dinghy’s top vang block.

Features:

• Breaking Load: 1000kg
• Length: 57mm
• Maximum Line Diameter: 8mm
• Max Working Load: 350kg
• Weight: 55g

Available in Blue or Black

Featuring a slightly longer body to incorporate the ILCA vang key into a neat, lightweight and extremely strong package. The vang key is held in place with a clevis pin and split ring, so is easily replaced.

The new lightweight Titanium sheave includes Allen's specially devised V profile, optimised for the fast running of rope without weakening the working load of the line. The V profile additionally allows smaller Dyneema or wire lines to be paired with the TiiTAN block, whilst retaining the friction reduction benefits of a larger sheave diameter. 

The TiiTAN bearing system is one of a kind. Featuring twin rows of ceramic ball bearings running on a stainless-steel axle gives the titanium sheave unmatched rolling speeds. Ceramic ball bearings also offer the added benefit of reduced friction in salt water, when compared to stainless steel bearings. 

A key feature within the TiiTAN bearing system is the precision plain bearing washer. When the TiiTAN is exposed to extreme static loads, which would normally cause damage to the internal bearing system, it changes to a plain bearing block. Stopping the ball bearings from getting damaged and thus no longer performing as designed. As soon as the static load is reduced the TiiTAN returns to a high-performing dynamic block. 

The load at which this change happens has undergone meticulous testing and development to ensure the block stays in dynamic mode for as long as possible. 

Aluminium side cheeks hold the TiiTAN together and offer a much stronger and longer-lasting body that holds its shape under extreme loads. These side cheeks feature a chamfered rope guide to keep the block in the correct orientation as well as two lashing line holes. We recommend using thin whipping twine or kite line to lash the attachment rope in place. 

The TiiTAN block is perfect for use across a wide range of watercraft, including high-performance dinghies, foiling dinghies, sports boats and grand prix yachts. 

Applications: 

• Vang cascades
• Halyard turning points
• Backstay systems
• Highly loaded Cunningham
• Outhaul systems 

Features:

• Weight: 43g 
• Length: 48mm
• Clevis Pin Diameter: 5mm
• Maximum Line Diameter: 8mm
• 21% lighter than A2031XHL-873
• Maximum Working Load: 500kg
• Breaking Load: 1000kg 
• Lightweight titanium sheave
• Custom body to incorporate SA0873 vang key
• Ceramic ball bearings for faster rolling speeds
• Extremely high loading aluminium side cheeks
• Colour: Grey

This kicker pack is designed for use with the Laser® or ICLA dinghy.

Super smooth and reliable, the dinghy kicker pack is a simple way to upgrade your kicker system to a more streamlined racing setup.

Features:

• 5mm Speckled Dyneema
• 4mm Red Dyneema
• A2303 - 20mm Dynamic Bearing Double Block with Becket
• A4380F - Plain Bearing 27mm Becket Block with Vang Key
• A5861 - Lower Vang Unit
• Weight: 439g

​This downhaul and outhaul pack is designed for use with the Laser® or ICLA dinghy and is an easy and class legal way to upgrade your control systems.

Features:

• 5mm Shockcord - 1000mm long
• 4mm Mast retaining line
• 4mm Red Dyneema - 620mm 
• 4mm Red Dyneema - 920mm
• 4mm Red Dyneema - 1710mm
• 4mm Speckled Dyneema - 600mm
• 4mm Speckled Dyneema - 4700mm
• 5mm Speckled Dyneema - 3900mm
• A5848 - Proleads and cleats
• A2020 - Dynamic 20mm Blocks
• Rope stoppers
• A5849 - 20mm Blocks deck plate
• 4 self tapping screws
• Weight: 528g