Spinlock Rig Sense Tension Gauge - The rig tension gauge for repeatable rig settings - aid race up and preparation.

​Features:

• Loads on both wire and fibres
• Diameter range 2-5mm (3/32-13/64")
• Direct Linear Scale with Tension output
• Composite calibrated leaf spring
• Stainless steel contact points
• Ergonomic robust body
• Compact size, durable and light
• Easy one handed operation
• Carry bag included
• Rig-Sense App Instructions
• Rig-Sense Instructions
• Rig-Sense Tuning Guide
• Spinlock Rig-Sense Loos Gauge Conversion Chart

Rig Sense App:

Rig Sense App (iOS and Android) allows users to work efficiently with their gauge, store and manage their data in a single place on smart phones and tablets.

Rig-Sense App - Using Rig Sense, record data of critical settings to ensure repeatable race setting over differing conditions. Create custom templates to build settings from, add images and share and export data for later analysis with your class.

Furling kits and equipment make furling quicker and easier whilst on the water for larger dinghies or keelboats. They allow a sailor to easily and quickly furl a jib on the water before landing or once ashore - at the pull of a line!

Designed to be furled and unfurled under load.

Features:

• Fork Width: 8mm
• Height: 88mm
• Length: 68mm
• Maximum Working Load: 430kg
• Pin Diameter: 5mm
• Weight: 112g

Selden has developed a fully adjustable spreader system for the ultimate in adjustment and rig control.

• Function - Ergonomic, moulded composite thumbscrews are easy to adjust, and the adjusters are designed to provide a simple turn-forward-to-push-forward logic. The spreaders can be adjusted in as little as 1' increments. A hole is provided for permanent pin locking if required.
• Aerodynamics - Both thumbscrews and spreader lugs are low profile, minimum windage composite mouldings.
• Durability - Moving parts in self-lubricating composite and anodised aluminium
• Strength - Mast bracket is a sturdy stainless steel pressing incorporating lightening holes.
• Reliability - The bracket incorporates permanently built-in dihedral to ensure the spreaders bisect the shroud angles: no danger of spreader droop and loss of control.

The fully adjustable spreader system is available on new Selden masts produced from Kappa, Cumulus, Epsilon and Gamma sections and comes complete with the aerofoil spreader section and adjustable spreader ends. 

Features:

• Length: 400mm
• Extra sweep designed for Flying Fifteen Class
• Manufacturer Code: 503-225-01
• Selden Spreader Systems Information Sheet​

The EZI Launcher range of fittings are designed to allow the use of twin spinnaker poles on conventional spinnaker boats, such as Merlin Rockets, 505's, Scorpions, Ospreys and Flying 15's to name but a few.

Manufacturered in the UK, EZI Launcher have standard products that fit most mast sections, as well as a range of pole ends, including the unique sheaved end to reduce friction in some systems. There are options to make bespoke launchers to fit any mast section - contact the VR Support Crew for more details.

Features:

• Two Standard Pole Ends
• Designed to suit 45mm mast section
• EZI Launcher Compatibility Chart - see images above.

The EZI Launcher range of fittings are designed to allow the use of twin spinnaker poles on conventional spinnaker boats, such as Merlin Rockets, 505's, Scorpions, Ospreys and Flying 15's to name but a few.

Manufacturered in the UK, EZI Launcher have standard products that fit most mast sections, as well as a range of pole ends, including the unique sheaved end to reduce friction in some systems. There are options to make bespoke launchers to fit any mast section - contact the VR Support Crew for more details.

Features:

• Two Standard Pole Ends
• Designed to suit 45mm mast section
• Additional upgrade kit pulley system available below - this allows the line to pull forward instead of straight down to help support the mast
• EZI Launcher Compatibility Chart - see images above.

The EZI Launcher range of fittings is designed to allow the use of twin spinnaker poles on conventional spinnaker boats, such as Merlin Rockets, 505's, Scorpions, Ospreys and Flying 15's to name but a few.

Manufacturered in the UK, EZI Launcher have standard products that fit most mast sections, as well as a range of pole ends, including the unique sheaved end to reduce friction in some systems. There are options to make bespoke launchers to fit any mast section - contact the VR Support Crew for more details.

Features:

• Two Sheaved Pole Ends
• Designed to suit 45mm mast section
• EZI Launcher Compatibility Chart - see images above.

The EZI Launcher range of fittings are designed to allow the use of twin spinnaker poles on conventional spinnaker boats, such as Merlin Rockets, 505's, Scorpions, Ospreys and Flying 15's to name but a few.

Manufacturered in the UK, EZI Launcher have standard products that fit most mast sections, as well as a range of pole ends, including the unique sheaved end to reduce friction in some systems. There are options to make bespoke launchers to fit any mast section - contact the VR Support Crew for more details.

Features:

• Two Sheaved Pole Ends
• Designed to suit 45mm mast section
• Additional upgrade kit available below - this allows the line to pull forward instead of straight down to help support the mast
• EZI Launcher Compatibility Chart - see images above.

The EZI Launcher range of fittings are designed to allow the use of twin spinnaker poles on conventional spinnaker boats, such as Merlin Rockets, 505's, Scorpions, Ospreys and Flying 15's to name but a few.

Manufacturered in the UK, EZI Launcher have standard products that fit most mast sections, as well as a range of pole ends, including the unique sheaved end to reduce friction in some systems. There are options to make bespoke launchers to fit any mast section - contact the VR Support Crew for more details.

Features:

• Two Standard Pole Ends
• Designed to suit 45mm mast section
• Twin pulley system with sheaves - this allows the line to pull forward instead of straight down to help support the mast
• EZI Launcher Compatibility Chart - see images above.

The EZI Launcher range of fittings are designed to allow the use of twin spinnaker poles on conventional spinnaker boats, such as Merlin Rockets, 505's, Scorpions, Ospreys and Flying 15's to name but a few.

Manufacturered in the UK, EZI Launcher have standard products that fit most mast sections, as well as a range of pole ends, including the unique sheaved end to reduce friction in some systems. There are options to make bespoke launchers to fit any mast section - contact the VR Support Crew for more details.

Features:

• Two Sheaved Pole Ends
• Designed to suit 45mm mast section
• Twin pulley system with sheaves - this allows the line to pull forward instead of straight down to help support the mast
• EZI Launcher Compatibility Chart - see images above.