Furling kits and equipment make furling quicker and easier whilst on the water for larger dinghies or keelboats. They allow a sailor to easily and quickly furl a jib on the water before landing or once ashore - at the pull of a line!

Roller furling gear for jibs and headsails.

Features:

• Fork Width: 11mm
• Height: 47.5mm
• Length: 34mm
• Maximum Working Load: 400kg
• Pin Diameter: 5mm
• Weight: 38g

Selden launched a dinghy sized jib furler for its Furlex range of headsail reefing systems. The top swivel and bottom furler feature the same quality, innovation and performance that has made Furlex the world's best selling range of furling systems.

Features:

• Manufacturer Code: 539-450-02
• Selden Furlex 20S, 30S & 40S Guide

The Furlex 20S bottom furler has twin bearing units with 4mm stainless steel ball bearings. These larger ball bearings run in multi-axis bearing units to reduce friction and wear. A further benefit of the bearing design is that with one bearing in the upper part of the furling drum and one in the lower, the radial torque from the furling line is evenly distributed. This eliminates the problem of the drum twisiting, a common cause of friction in more basic designs.

The unit is manufactured from glass-filled composite with moulded-in stainless steel reinforcement. This includes the attachment toggle that will fit most dinghy bow fittings. Once in place, the drum cover can be easily adjusted to achieve the correct exit angle for the furling line.

The top swivel also has a bearing system with 4mm ball bearings to minimise friction. It is particularly important to select a low friction top unit to prevent the halyard from twisting, instead of the swivel. The Furlex 20S top swivel can also be supplied with a guide to keep the forestay away from the jib. This solves the common problem of the forestay becoming twisted with the jib luff.

The RWO Infinity Furler range - the mechanism of both the R2205 Infinity Furler Drum and the R2207 Infinity Swivel operates smoothly, efficently and allows for unlimited revolutions. The bearings are stainless steel, lubricated and double sealed making them entirely maintenance free.

Designed for use with endless line, this system means no more loose rope on board when the sail is furled.

Features:

• Boats up to 6m
• Length: 100mm
• Maximum Work Load: 325kg
• Break Load: 800kg
• Weight: 75g

Features:

• Hole Diameter ø (HD - see images): 8.5mm
• Top Swivel Height (TS - see images): 52mm
• Manufacturer Code: 539-480-01
• Selden Furlex 20S, 30S & 40S Guide

Suitable for boats up to 6m. The gear has stainless steel spindles and ball bearings to enhance working loads. The drum on the bottom swivels is of moulded Acetal secured to a body made of high grade anodised aluminium.

Features:

• Length (L): 45mm
• Aperature (D): 10mm
• Pin (Top): 5mm
• Pin (Bottom):  6mm
• Breaking Load: 900kg
• Weight: 99g

Furling drum for endless line for dinghies up to 6 metres for use with 4mm line

Features:

• Break Load: 900kg
• Length: 45mm
• Line Diameter: 4mm endless
• Weight: 114g

Selden launched a dinghy sized jib furler for it's Furlex range of headsail reefing systems. The top swivel and bottom furler feature the same quality, innovation and performance that has made Furlex the world's best selling range of furling systems.

Features:

• Supplied with 2.5mm rope
• Manufacturer Code: 539-455-02
• Selden Furlex 20S, 30S & 40S Guide

The Furlex 20S bottom furler has twin bearing units with 4mm stainless steel ball bearings. These larger ball bearings run in multi-axis bearing units to reduce friction and wear. A further benefit of the bearing design is that with one bearing in the upper part of the furling drum and one in the lower, the radial torque from the furling line is evenly distributed. This eliminates the problem of the drum twisiting, a common cause of friction in more basic designs.

The unit is manufactured from glass-filled composite with moulded-in stainless steel reinforcement. This includes the attachment toggle that will fit most dinghy bow fittings. Once in place, the drum cover can be easily adjusted to achieve the correct exit angle for the furling line.

The top swivel also has a bearing system with 4mm ball bearings to minimise friction. It is particularly important to select a low friction top unit to prevent the halyard from twisting, instead of the swivel. The Furlex 20S top swivel can also be supplied with a guide to keep the forestay away from the jib. This solves the common problem of the forestay becoming twisted with the jib luff.

The RWO Infinity Furler range - the mechanism of both the R2205 Infinity Furler Drum and the R2207 Infinity Swivel operates smoothly, efficently and allows for unlimited revolutions. The bearings are stainless steel, lubricated and double sealed making them entirely maintenance free.

Designed for use with endless line, this system means no more loose rope on board when the sail is furled.

Features:

• Line Diameter: 6mm
• Length: 100mm
• Maximum Work Load: 325kg
• Break Load: 800kg
• Weight: 160g

Furling kits and equipment make furling quicker and easier whilst on the water for larger dinghies or keelboats. They allow a sailor to easily and quickly furl a jib on the water before landing or once ashore - at the pull of a line!

Designed to be furled and unfurled under load.

Features:

• Fork Width: 8mm
• Height: 88mm
• Length: 68mm
• Maximum Working Load: 430kg
• Pin Diameter: 5mm
• Weight: 112g

The new Furlex 30 is a high load increased capacity version of the Furlex 20S.

It is suitable for larger dinghies and keelboats where the Furlex 20 is marginal on load and or rope capacity. It is possible to mix and match with the Furlex 20 top swivel.

The new furler system features the same quality, innovation and performance that has made Furlex the World’s best selling range of Furling gear. The lower swivel is made of a high strength stainless steel structure with composite drum and cover. The cover fairlead position can be orientated to suit your boats’ layout. 5mm stainless steel ball bearings provide low friction under high load.

Features:

• Technical Specifications:
  • Dimensioned for Forestay Diameter ø: 4mm
  • Maximum Service Load (Forestay): 900kg
  • Maximum Service Load (Halyard Swivel): 300kg
  • Maximum Recommended LP (Luff Perpendicular) measurement: 2500mm
  • Furling Line Diameter ø: 4mm
• Dimensions (see images):
  • Top Swivel Height (TS): 52mm
  • Top Swivel Guide Length (TSG): 100mm
  • Halyard Swivel Height (HSH): 90mm
  • Halyard Swivel Deduction (HSD): 180mm
  • Tack Fitting Height (TF): 55mm
  • Lower Swivel Height (LS): 106mm
  • Drum Diameter (D) ø: 85mm
  • Hole Diameter (HD) ø: 8.5mm
  • Pin Diameter (P) ø: 8mm 
• Drum with Tack Fitting
• Manufacturer Code: 539-490-01
• Selden Furlex 20S, 30S & 40S Guide