Categories BRANDS Colligo Marine Colligo Marine 3/8" Mini Series Chainplate Distributor
Categories BRANDS Colligo Marine Colligo Marine 1/2" Mini Series Chainplate Distributor
Categories BRANDS Colligo Marine Colligo Marine 3/8" Mini Series Carbon Male Chainplate Distributor
Categories BRANDS Colligo Marine Colligo Marine 7-9mm Line Terminator End Fitting
Categories BRANDS Colligo Marine Colligo Marine 5-7mm Line Terminator End Fitting - Mini Series
Categories CHANDLERY Rigging Chainplate Distributor Colligo Marine 1/2" Chainplate Distributor
Categories BRANDS Colligo Marine Colligo Marine Soft Padeye
Categories BRANDS Colligo Marine Colligo Marine 9-12mm Snatch Block
Categories BRANDS Colligo Marine Colligo Marine 12-13mm Torsion Rope Clamp
Categories BRANDS Colligo Marine Colligo Marine 11-13mm Open Terminator End Fitting
Colligo Marine 3/8" Mini Series Chainplate Distributor
RRP
£89.00
£101.80
Price includes VAT (for UK customers)(non UK customers tax deleted in Shopping Basket), plus delivery
UK ROYAL MAIL DELIVERY ORDERS OVER £75 (T & C'S APPLY)
FREE SUBSCRIPTION SPEND £150 - 6 MONTHS OR £300 - ANNUAL (T & C'S APPLY)
Available delivery methods: UK Royal Mail, UK DHL Express Courier Delivery, Euro DHL Express Delivery, International DHL Courier Delivery, VR Collection, International Royal Mail
Colligo Marine's chainplate distributors have been designed for setting up the tension of your lines through lashings through chainplates on deck, mast fittings and even turnbuckles.
Features:
- Three lashing holes - greater load distribution and easy tensioning
- Wide lashing hole distribution - easy final tensioning
- Material: Hard anodised aluminium 6061-T6
- A - Pin Size with Sleeve: 9.5mm
- Hole Size without Sleeve: 15.88mm
- B - Slot Size: 9mm
- C: Throat Depth: 39mm
- D - Section Diameter: 15mm
- E - Overall Diameter: 48mm
- F - Overall Width: 25mm
- G - Lashing Line Slot Size: 6.4mm
- Lashing Holes: 3
- Working Load (SWL): 3175kg
- Break Load: 6350kg
- Weight: 110g
- Colligo Marine Tip: Mini Series - custom sleeved to smaller sizes
We also recommend
 |
 |
 |
 |
*
Price includes VAT (for UK customers)
Browse these categories as well: Colligo Marine, Chainplate Distributor
Colligo Marine 1/2" Mini Series Chainplate Distributor
RRP
£95.00
£101.80
Price includes VAT (for UK customers)
Available delivery methods: UK Royal Mail, UK DHL Express Courier Delivery, Euro DHL Express Delivery, International DHL Courier Delivery, VR Collection, International Royal Mail
Colligo Marine's chainplate distributors have been designed for setting up the tension of your lines through lashings through chainplates on deck, mast fittings and even turnbuckles.
Features:
- Three lashing holes - greater load distribution and easy tensioning
- Wide lashing hole distribution - easy final tensioning
- Material: Hard anodised aluminium 6061-T6
- A - Pin Size with Sleeve: 12.28mm
- Hole Size without Sleeve: 15.88mm
- B - Slot Size: 9mm
- C: Throat Depth: 14.33mm
- D - Section Diameter: 30mm
- E - Overall Diameter: 48mm
- F - Overall Width: 25mm
- G - Lashing Line Slot Size: 6.4mm
- Lashing Holes: 3
- Working Load (SWL): 3175kg
- Break Load: 6350kg
- Weight: 68g
- Colligo Marine Tip: Mini Series - custom sleeved to smaller sizes
We also recommend
|
|
 |
 |
 |
|
 |
 |
*
Price includes VAT (for UK customers)
Browse these categories as well: Colligo Marine, Chainplate Distributor
Colligo Marine 3/8" Mini Series Carbon Male Chainplate Distributor
RRP
£81.00
£101.80
Price includes VAT (for UK customers)
Available delivery methods: UK Royal Mail, UK DHL Express Courier Delivery, Euro DHL Express Delivery, International DHL Courier Delivery, VR Collection, International Royal Mail
Colligo Marine's chainplate distributors have been designed for setting up the tension of your lines through lashings through chainplates on deck, mast fittings and even turnbuckles.
Features:
- Three lashing holes - greater load distribution and easy tensioning
- Wide lashing hole distribution - easy final tensioning
- Material: Hard anodised aluminium 6061-T6
- A - Pin Size with Sleeve: 9.53mm
- Hole Size without Sleeve: 12.8mm
- B - Slot Size: 9.94mm
- D - Section Diameter: 30mm
- E - Overall Diameter: 48mm
- F - Overall Width: 8mm
- G - Lashing Line Slot Size: 6.4mm
- Lashing Holes: 3
- Working Load (SWL): 1925kg
- Break Load: 3855kg
- Weight: 55g
- Colligo Marine Tip: Mini Series - sleeved down from 5/8" and can be sleeved to 1/2"
We also recommend
|
|
 |
 |
 |
|
|
|
|
|
*
Price includes VAT (for UK customers)
Browse these categories as well: Colligo Marine, Chainplate Distributor
Colligo Marine 7-9mm Line Terminator End Fitting
RRP
£90.00
£101.80
Price includes VAT (for UK customers)
Available delivery methods: UK Royal Mail, UK DHL Express Courier Delivery, Euro DHL Express Delivery, International DHL Courier Delivery, VR Collection, International Royal Mail
Colligo Marine's patented Line Terminator End Fittings are the only spliceable, lashable and pinable end fittings available that meet Hampidjan's recommended minimum 5/1 bending ratio for Dynex Dux.
This is essential for long term durability of Dyneema based lines as tight bending radii cause compressive stresses that weaken the line considerably.
Features:
- Pin Size with Sleeve: 12.8mm
- A - Hole Size without Sleeve: 15.88mm
- F - Slot Width: 10mm
- B - Overall Width: 15mm
- D - Overall Diameter: 66mm
- E - Recommended Line Size: 7-9mm
- C - Pin Size Depth: 24.5mm
- G - Lashing Line Slot Size: 6.4mm
- Lashing Holes: 4
- Working Load (SWL): 4535kg
- Break Load: 9070kg
- Weight: 120g
- Colligo Marine Tip: Typical Chainplate distributor CSS61 or CSS91 - see below
We also recommend
|
|
|
 |
 |
*
Price includes VAT (for UK customers)
Browse these categories as well: Colligo Marine, Line Terminator
Colligo Marine 5-7mm Line Terminator End Fitting - Mini Series
RRP
£92.00
£101.80
Price includes VAT (for UK customers)
Available delivery methods: UK Royal Mail, UK DHL Express Courier Delivery, Euro DHL Express Delivery, International DHL Courier Delivery, VR Collection, International Royal Mail
Colligo Marine's patented Line Terminator End Fittings are the only spliceable, lashable and pinable end fittings available that meet Hampidjan's recommended minimum 5/1 bending ratio for Dynex Dux.
This is essential for long term durability of Dyneema based lines as tight bending radii cause compressive stresses that weaken the line considerably.
Features:
- Mini Series - super lightweight
- Pin Size with Sleeve: 9mm
- A - Hole Size without Sleeve: 12mm
- F - Slot Width: 7.5mm
- B - Overall Width: 11mm
- D - Overall Diameter: 58mm
- E - Recommended Line Size: 5-7mm
- C - Pin Size Depth: 18mm
- G - Lashing Line Slot Size: 6.4mm
- Lashing Holes: 3
- Working Load (SWL): 1815kg
- Break Load: 3625kg
- Weight: 51g
- Colligo Marine Tip: Typical Chainplate distributor CSS94 or CSS95 - see below
We also recommend
|
|
|
*
Price includes VAT (for UK customers)
Customers who bought this product also bought
 |
 |
*
Price includes VAT (for UK customers)
Browse these categories as well: Colligo Marine, Line Terminator
Colligo Marine 1/2" Chainplate Distributor
RRP
£112.00
£101.80
You save £10.20
Price includes VAT (for UK customers)
Available delivery methods: UK Royal Mail, UK DHL Express Courier Delivery, Euro DHL Express Delivery, International DHL Courier Delivery, VR Collection, International Royal Mail
Colligo Marine's chainplate distributors have been designed for setting up the tension of your lines through lashings through chainplates on deck, mast fittings and even turnbuckles.
Features:
- Four lashing holes - greater load distribution and easy tensioning
- Wide lashing hole distribution - easy final tensioning
- Material: Hard anodised aluminium 6061-T6
- A - Pin Size with Sleeve: 12.8mm
- Hole Size without Sleeve: 15.88mm
- B - Slot Size: 7.94mm
- C: Throat Depth: 18.86mm
- D - Section Diameter: 17mm
- E - Overall Diameter: 54.88mm
- F - Overall Width: 25mm
- G - Lashing Line Slot Size: 6.4mm
- Lashing Holes: 4
- Working Load (SWL): 4080kg
- Break Load: 8615kg
- Weight: 31g
- Colligo Marine Tip: Custom sleeved to smaller sizes
We also recommend
 |
|
 |
|
|
 |
*
Price includes VAT (for UK customers)
Browse these categories as well: Chainplate Distributor, Colligo Marine
Colligo Marine Soft Padeye
RRP
£106.00
£101.80
You save £4.20
Price includes VAT (for UK customers)
Available delivery methods: UK Royal Mail, UK DHL Express Courier Delivery, Euro DHL Express Delivery, International DHL Courier Delivery, VR Collection, International Royal Mail
This innovative, patent pending, device allows the use of a lightweight Dyneema loop for attaching sheet leads, spinnaker sheets, or even staysail tacks without the need for a heavy stainless padeye.
Just insert the padeye body into a 19mm (3/4") hole with some bedding compound e.g. TikalFlex and use the combined backing plate/nut to retain the fitting. Make sure to have the needed structure in your deck or bulkhead.
The provided Dyneema loop can be easily changed when needed and uses a simple stopper knot for retention. Sealant e.g. TikalFlex Contact 12 can be used on the line to eliminate potential leaks.
Features:
- Material: Hardcoated anodised aluminium 6061 T6
- Intregrated Backing Plate Diameter: 60mm
- Sealant recommended to seal the line to prevent leakage e.g. TikalFlex Contact 12
- Padeye: 19mm
- Working Load SWL: 1360kg
- Breaking Load: 3175kg
- Soft Padeye Technical Sheet
We also recommend
 |
 |
 |
 |
*
Price includes VAT (for UK customers)
Browse these categories as well: Colligo Marine, Padeyes, Eyes - Bolt, Deck, Nut & Pad
Colligo Marine 9-12mm Snatch Block
RRP
£138.00
£101.80
You save £36.20
Price includes VAT (for UK customers)
Available delivery methods: UK Royal Mail, UK DHL Express Courier Delivery, Euro DHL Express Delivery, International DHL Courier Delivery, VR Collection, International Royal Mail
Winner of the 2012 Pittman Award for Innovation - the blocks have no moving parts and designed to work with low friction lines e.g. Dyneema.
Ideal for spinnaker sheet leads, external mast blocks for halyards. High strength and very low weight
Features:
- Material: Hardcoated anodised aluminium
- Soft shackle not included
- Sheet Line: 9-12mm
- Weight: 96g
- Working Load (SWL): 2265kg
- Break Load: 4530kg
We also recommend
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
*
Price includes VAT (for UK customers)
Browse these categories as well: Colligo Marine, Snatch Blocks
Colligo Marine 12-13mm Torsion Rope Clamp
In stock
£105.90
Price includes VAT (for UK customers)
Available delivery methods: UK Royal Mail, UK DHL Express Courier Delivery, Euro DHL Express Delivery, International DHL Courier Delivery, VR Collection, International Royal Mail
Colligo Marine's patented line clamps for torque lines - both top down spinnaker and luff line (Code Zero) sails.
Features:
- Torsion Rope Diameter: 12-13mm
- Simple to install - 5 minutes (see video below)
- Easy to adjust line length
- Minimum Hold: 1800kgf (Kilogram-Force)
We also recommend
 |
 |
 |
 |
 |
 |
 |
 |
*
Price includes VAT (for UK customers)
Browse these categories as well: Colligo Marine, Furling Cables
Colligo Marine 11-13mm Open Terminator End Fitting
RRP
£100.00
£113.90
Price includes VAT (for UK customers)
Available delivery methods: UK Royal Mail, UK DHL Express Courier Delivery, Euro DHL Express Delivery, International DHL Courier Delivery, VR Collection, International Royal Mail
Colligo Marine's patented Open Terminator End Fittings are the only spliceable, lashable and pinable end fittings available that meet Hampidjan's recommended minimum 5/1 bending ratio for Dynex Dux.
This is essential for long term durability of Dyneema based lines as tight bending radii cause compressive stresses that weaken the line considerably.
Features:
- F - Slot Width: 14mm
- D - Overall Diameter: 74mm
- E - Recommended Line Size: 11-13mm
- C - Pin Size Depth: 37mm
- Working Load (SWL): 6800kg
- Break Load: 13605kg
- Weight: 172g
We also recommend
|
|
|
 |
 |
*
Price includes VAT (for UK customers)
Browse these categories as well: Colligo Marine, Line Terminator